|
|
|
N Series coaxial connectors
are medium-sized, threaded coupling connectors designed
for use from DC to 11 GHz. Their consistently low
broadband VSWR have made them popular over the years
in many applications. The N series connector is
impedance matched to 50 ohm cables.
Cable terminations are available in crimp, clamp
and solder configurations. The threaded coupling
ensures proper mating in applications where shock
and extreme vibration are design considerations.
N connectors are used in aerospace, broadcast audio
and video applications as well as many microwave
components such as filter, couplers, dividers, amplifiers
and attenuators. |
|
|
• Interface
Dimensions |
|
PLUG
Letter |
Millimeters(Inches) |
Minimum |
Maximum |
A |
1.60(.063) |
1.68(.066) |
B |
— |
8.38(.330) |
C |
16.00(.630) |
— |
D |
0.08(.003) |
— |
E |
5.33(.210) |
5.84(.230) |
F |
4.01(.158) |
4.27(.168) |
G |
4.50(.177) |
— |
H |
0.41(.016) |
1.52(.060) |
I |
10.11(.398) |
10.46(.412) |
|
JACK
Letter |
Millimeters(Inches) |
Minimum |
Maximum |
A |
8.03(.316) |
8.13(.320) |
B |
8.53(.336) |
8.74(.344) |
C |
4.75(.187) |
5.26(.207) |
D |
5.33(.210) |
— |
E |
10.72(.422) |
— |
F |
1.19(.047) |
1.96(.077) |
G |
4.37(.172) |
5.13(.202) |
H |
3.00(.118) |
3.15(.124) |
I |
— |
15.93(.627) |
J |
9.04(.356) |
9.19(.362) |
|
|
Electrical: |
Impedance |
50 ohm |
75 ohm |
Frequency Range |
0 to 11.0 GHz |
0-1 GHz |
VSWR |
Straight : 1.3 max ; Right Angle : 1.5 max |
Working Voltage |
1,000 volts rms max at sea level |
Dielectric Withstanding
Voltage |
2,500 volts rms max at sea level |
Contact Resistance |
center contact=1.0 Milliohms max
outer contact=1.0 Milliohms max |
Insertion Loss |
0.3 dB max at 10 GHz |
Insulation Resistance |
5,000 Megohms min |
|
|
Mechanical
& Environmental: |
Mating |
5/8"-24 threaded coupling |
Cable Retention |
RG-58,141,142,223 →40 lbs min
RG-59,62A,210→40 lbs min
RG-174,188,316 →20 lbs min
RG-8A,9B,213,214 →80 lbs min |
Durability |
500 matings |
Coupling Nut Retention |
100 lbs min |
Temperature Range |
-65°C to 165°C |
Vibration |
MIL-STD-202 Method 204 Test Cond. B. |
Salt Spray |
MIL-STD-202 Method 101 Test Cond. B. |
Thermal shock |
MIL-STD-202 Method 107 Test Cond. B. |
|
|
Materials
/ Finish: |
|
Material |
Plating |
Connector Body |
Brass |
Nickel or Silver |
Center Contact |
Male:Brass
Female :Brass,
Phosphor Bronze or
Beryllium Copper |
Gold
Gold |
Insulation |
Teflon |
None |
Gasket |
Silicone Rubber, Rubber |
None |
Crimp Ferule |
Annealed Copper |
Same as Body |
|
|
|